January 2008 |
Surface Science |
177-08
Electronic properties of (Co, Ag) self-organised nano dots on Au(1 1 1) vicinal surfaces. Didiot C, Fagot-Revurat Y, Pons S. APP. SURF. SCI., 2007, 254(1), 45-49.
|
178-08
The influence of cobalt on the corrosion resistance and electromagnetic shielding of electroless Ni-Co-P deposits on Al substrate. Gao Y, Huang L, Zheng Z. APP. SURF. SCI., 2007, 253(24), 9470-9475.
|
October 2007 |
982-07
Surface properties, textural features and catalytic performance for NO+CO abatement of spinels MAl2O4 (M = Mg, Co and Zn) developed by reverse and bicontinuous microemulsion method. Giannakas A, Ladavos A, Armatas G.
|
983-07
Pd, Co and Co-Pd clusters on the ordered alumina film on NiAl(110): Contact angle, surface structure and composition. Napetschnig E, Schmid M, Varga P.
|
984-07
The formation of sharp NiO(100-cobalt interfaces. Allegretti F, Parteder G, Ramsey M.
|
April 2007 |
521-07
Effect of Bi surfactant in the heteroepitaxial growth of Co on Cu surfaces. Kamiko M, Chihaya H, Sugimoto W.
|
522-07
Structural study of Co/Pd(111) and CO/Co/Pd(111) by surface X-ray absorption fine structure spectroscopy. Miyawaki J, Matsumura D, Nojima A.
|
523-07
Adsorption and thermal decomposition of C60 on Co/Si(111)-7x7. Zilani M, Xu H, Sun Y.
|
January 2007 |
264-07
Effect of combination of gas phase deposition and electric-spark alloying on wear resistance of VK8 (WC-7% Co) hard alloy. Stepanova O, Podchernyaeva I, Timofeeva I.
|
265-07
Loading cobalt on carbon nanofibres. Keyser M, Prinsloo F.
|
266-07
Porous nickel MCFC cathode coated by potentiostatically deposited cobalt oxide. Escudero M, Mendoza L, Cassir M.
|
267-07
Residual stress analysis in Co-based laser clad layers by laboratory X-rays and synchrotron diffraction techniques. De Oliveira U, Ocelik V, De Hosson J.
|
268-07
SHI induced silicide formation and surface morphology at Co/Si system. Agarwal G, Sharma P, Jain I.
|
269-07
Temperature-dependent shape transformation of Co clusters on Ag/Ge(111) 3x3 surfaces. Fu T, Lin C, Tsay S.
|
October 2006 |
1014-06
A study of Taguchi optimisation method for identifying optimum surface roughness in CNC face milling of cobalt-based alloy (Stellite 6). Bagci E, Aykut E.
|
1015-06
Investigation of Co/Ag discontinuous multilayers prepared by UHV electron beam evaporation. Sankaranarayanan V, Prakash O, Lakshmikumar S.
|
1016-06
Property of cobalt nickel silicide by thermal annealing of Co/Ni bilayer on a silicon substrate. Cheong S, Song O, Kim M.
|
1017-06
Solar treatment of pre-deposited and atmospheric plasma sprayed WC-18%Co powder on stainless steel 304L. Pantelis D, Griniari A.
|
1018-06
Thermal diffusion of Co into anatomically flat ZnO(000-1) surfaces investigated by scanning probe microscopies and low energy electron diffraction. Dumont J, Seldrum T, Couet S.
|
April 2006 |
500-06
Mass-filtered cobalt clusters in contact with epitaxially ordered metal surfaces. Bansmann J, getzlaff M, Kleibert A.
|
501-06
Kinetic and thermodynamic considerations for oxygen absorption/desorption using cobalt oxide. Hutchings K, Wilson M, Larsen P.
|
502-06
Effect of Co ion implantation on GMR of [NiFeCo(10 nm)/Ag(10 nm)]x20 multilayer film. He Y, Hu S, Li J.
|
503-06
Microstructure and wear properties of laser melted CoMoSi/Co2Si metal silicide alloys. Xun L, An L, Lingyun Z.
|
January 2006 |
232-06
Chemisorption of Co monolayer on H-passivated Si(111) surface: comparison with clean Si(111) surface. Ma L, Wang J, Zhao J.
|
233-06
Electroless Co(W,P) capping application development. Fang H, Weidman T, Shanmugasundram A.
|
